No results were found for the filter!
Shocker XLS/RSX Drop Back Rail The drop back rail for the Shocker pushes the air source adapter(ASA) back toward the player. The rail also lowers the ASA approximately 1/2 inch which raises the marker slightly in the sight picture of the player. This repositioning...
29.95€ *
Shocker XLS/RSX Grip Kits Grip kits designed for your Shocker XLS or RSX - straight from the factory. With unparalleled fit and finish these grips are designed to make your Shocker XLS or RSX stand out from the crowd! The unique grip design allows all diagnostic...
39.95€ *
Shocker XLS/RSX Screw Kit Whether you just want to have a spare for everything, or your replacing a missing screw or pin, this kit has everything you need to replace each piece of hardware on your Shocker XLS or RSX. All fasteners used to secure the various...
10.95€ *
Shocker XLS/RSX Seal Kit Whether you just want to have a spare for everything, or your replacing a damaged o-ring or two, this kit has a full rebuild for your Shocker XLS or RSX. Factory o-rings are provided in specific materials and durometers to achieve...
15.95€ *
![Shocker XLS/RSX Spare Part: 9 Volt Adapter [SHK139]](https://www.dlxeurope.com/media/image/ec/d5/3f/shocker-xls_rsx-ersatzteil_-batteriekabel-_shk139__4365_1_200x200@2x.jpg "Shocker XLS/RSX Spare Part: 9 Volt Adapter [SHK139]")
Shocker XLS/RSX Spare Part: 9 Volt Adapter... Batteries connector of the Shocker XLS and RSX, it is directly connected to the board. Delivery without board Suitable for 9V alkaline batteries
9.95€ *
Shocker XLS/RSX Spare Part: Bolt Front Blue Being phased into production November 2015, this blue bolt replaces the gold bolt as the standard armature to the bolt system. There is no performance difference between the two parts, the only difference is that the main bolt sail...
24.95€ *
Shocker XLS/RSX Spare Part: Main Board Shocker Main Board SHK117 This is the main board for the Shocker XLS und RSX. This board is the export version (all fire modes) The acquisition and possession is permitted in Germany, but the installation and use may only take place...
59.95€ *
Shocker XLS/RSX Spare Part: Rear Solenoid Manifold The solenoid rear bracket is used in the Shocker XLS and RSX. Do not tighten the small screws too much otherwise they may break.
12.95€ *
Shocker XLS/RSX Spare Part: SHK103 ejection cup Shocker Paintball Factory part: SHK103 ejection cup The ejection cup is located at the back of the bolt and puts the spring under tension for the bolt to eject when released.
9.95€ *
![Shocker XLS/RSX Spare Part: Solenoid [SOL303]](https://www.dlxeurope.com/media/image/39/64/70/shocker-xls_rsx-ersatzteil_-solenoid-_sol303__4663_1_200x200@2x.jpg "Shocker XLS/RSX Spare Part: Solenoid [SOL303]")
Shocker XLS/RSX Spare Part: Solenoid [SOL303] Factory solenoid for Shocker XLS and RSX markers. [SOL303]
69.95€ *
Shocker XLS/RSX Spare Part: Vertical Retainer... Shocker SHK120/SHK220 Vertical Retainer Latch The vertical retainer in the bolt lock of the Shocker XLS and RSX. This component holds the bolt in the marker. If the pressure in the Shocker rises too high, this component is designed to...
9.95€ *
Shocker XLS/RSX Spare Part: Vision Harness This is a full set of eye wires, plug, and sensors to replace the eye system in your Shocker XLS and RSX. Wether you have damaged a sensor, or torn a wire, these will get you back on the field ASAP! The Shocker XLS or RSX eyes are...
19.95€ *
Shocker XLS/RSX/CVO German Spring Dies ist die Feder für den Vertical Regulator in der SmartParts Shocker XLS/RSX/CVO. Bei dieser Vertical Regulator Feder handelt es sich um die Export Version. Mit ihr lässt sich die Schussgeschwindigkeit für Spiele im Ausland...
9.95€ *
SP Snap Back Hat This clean snap back hat is custom embroidered with the Shocker logo and is one size fits all. Keep the sun out of your eyes on grand stands and look great doing it - all while showing your love for the best marker in the game - Shocker!
24.95€ *
Viewed